home11

Multisynth-based Architecture

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

home4

How is 3D printing technology used in Architecture and Medicine

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

images3

Creating A Web Site With A Search Engine Optimized Architecture

A web sites architecture is what grounds all future search engine marketing efforts. An optimal web site architecture facilitates a search engine in traversing
and understanding the site. Therefore, creating a web site with a search engine optimized architecture is a major contributing factor in achieving and maintaining high search engine rankings.
Architecture should also be considered throughout a web sites lifetime by the web site developer, alongside other factors such as aesthetics and usability. If a new feature does not permit a search engine to
access the content, hinders it, or confuses it, the effects of good content may be reduced substantially.For example, a web site that uses Flash or AJAX technologies inappropriately may obscure the majority
of its content from a search engine.

Optimizing a sites architecture frequently involves tinkering with variables that also affect usability and the overall user perception of your site. When we encounter such situations, we alert you to why
these certain choices were made. Sometimes we find that SEO enhancements run counter to usability. Likewise, not all designs that are user friendly are search engine friendly. Either
way, a compromise must be struck to satisfy both kinds of visitors users and search engines.

One common misconception is that search engine optimization efforts can be made after a web site is launched. This is frequently incorrect. Whenever possible, a web site can and should be designed to be
search engine friendly as a fundamental concern.Unfortunately, when a preexisting web site is designed in a way that poses problems for search engines,search engine optimization can become a much larger task. If a web site has to be redesigned, or partially
redesigned, the migration process frequently necessitates special technical considerations. For example,old URLs must be properly redirected to new ones with similar relevant content.

home15

Architectural Evangelist Advocating Innovation In Architecture

Architectural Evangelist is a one of a kind architectural newsletter broadcasting the message of the cause, effect and need for innovation in the field of architecture. It is the brain child of a team of designers, architects, content developers,and technicians. We are speaking to architects, students, builders, interior designers/decorators and re-modelers. Architectural Evangelist braces the change of seasons with our centralized them of spring in the first issue. Our aim is to maintain Architectural Evangelist as a quarterly issue, with news and updates about the business of offshoring, architecture and design; How Tos; creative inputs from design experts, technical professionals and industry gurus; and articles, resources and everything in between.

Spring/Summer 08 design tips for your home
Color, breeze and sunshinethats what comes to mind when you say spring. Design tips for your home that can make any ordinary room into a fun, cozy haven This spring spruce up for a breath of fresh air to sweep through your living spaces with Architectural Evangelists design ideas and tips that spell spring like nothing else can.

Going green
Building and construction have a great effect on the environment. In the United States alone buildings alone account for 40-49% energy consumption, 25% of water consumption, 70% of total energy consumption and 38% of total carbon dioxide emissions. Green building information, tips and trends.

The new face of outsourcing
In this age of competition, companies are increasingly turning to specialization for improving cost and time feasibility and increasing efficiency. With knowledge intensive areas entering the fray, it allows organization the flexibility and provides the resources for the business growth of the organization
How to tip: Choosing the right offshore services provider
To build long term relationships with offshore service provider you need to play detective and find out all you can about the organization first. Heres what you need to know

images4

Enterprise architecture helps enhance the business strategies

IT industry is the leading sector in the commercial business world. It has many streams to develop the business and to leave the footprints across the globe. They are IT services, hardware implementation, software development, marketing and many more. Software development is the major stream to gain popularity with new innovative technologies and applications. There are numerous platforms and programming languages to develop several software programs and applications to enhance the business. They are Java, HTML, XML, C++, embedded C, Dotnet, visual basics, Siebel, primavera, oracle, SQL and many more. All these platforms are used to design, code and develop multiple applications both for web and desktop purpose.

These days, many organizations are looking for the new innovations to enhance the businesses. Enterprise architecture is the one, which can help organizations enhance the efficiency and flexibility. It helps the business to identify the marketing strategies in several ways to increase the competency and performance. This stream has the ability to translate these marketing insights and needs to common business language of IT strategy to maintain the relationship with the business line executives. It can solve several issues in business to understand the multiple products, platforms, strength and weakness. Generally, it is defined as the process of translating the business strategies into an effective way of enterprise.

These days, many organizations are offering enterprise architecture jobs to enhance their marketing ideas to give an outstanding performance. People, who enter into this field, are designated as enterprise architects. They can assist the organizations to accomplish the business values and to drive the smarter initiatives to improve the performance. Creation, improvement and communication is the key requirement for this architecture that is varied by the principles. It has improved the models with different specifications to describe the evolution. It has a good scope in the IT world with many processes and enterprises to get the benefits.

It has several frameworks such as IAF, EAF, DoDAF and TOGAF. These frameworks are also used to improve the flexibility and growth in the industry. It is the major applications to develop the communication among all kinds of business units to get more industrial needs. In today’s innovative world, many IT companies have implemented this stream to maintain the growth and unit relationship. It is important to manage the several requirements and units in the industry. For that, you have to develop the communication to avoid many hassles. Hence, enterprise architecture is the one to maintain these communication and relationship and improve the performance.

Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs

home18

Struggles and New Approaches to Information Architecture

Information architecture is defined as the outline or blueprint that describes how data and information is systematized, ordered, and controlled. Another definition of information architecture says that it is a system of spotting, managing, and controlling patterns in data. This data-handling technology aims to be able to make complex, ambiguous, and fuzzy sets of information, data, and other resources as simple and as understandable as they can be.

According to a business-related site, it has been unfortunate in these modern times that most business companies struggle in terms of the use of the technology of information architecture. Actually, some businesses are having difficulties even with the most basic applications of information. A significant quantity of companies still experiences difficulties in getting up-to-date, comprehensive, precise, and accurate views of the results of the projects and actions they have done previously. Companies now just create proposals for new, innovative, predictive, and analytical transformation and differentiation in terms of information handling and architecture in a diminishing effort. The result of this failure of the companies to value the technology being delivered by information architecture leads to the struggles they experience that are stated in this article. e.

Companies that are struggling in executing information architecture processes need to adapt a new one that suits their needs the best. In choosing a new style of information architecture, they must bear in mind that in the world of technology, the amount of information and data inputted into the Web is growing in a much rapid way. Also, the speed at which information is received has gone significantly faster than before. Data comes in various types, so an information architecture system must be flexible to such variety of files.

Automation is in demand these days. To learn more about IC693DSM302 and IC693DSM314, check online and be informed about GE Fanuc PLC.

home5

Victorian Architecture – Where Culture Meet Elegance

The term Victorian architecture refers to a number of styles of architecture, which was primarily used during the Victorian period. These architectural styles were quite popular during the period of mid 1837 to the beginning of 1901. This period marked the rule of Queen Victoria and was named after her.

The Victorian era of architecture, was marked by a number of styles, such as Renaissance Revival, Neo-Grec, British Arts and Crafts movement, Italianate, Gothic Revival, Jacobethan, Neoclassicism, Industrial architecture, Painted ladies, Queen Anne, Stick-Eastlake, Romanesque Revival, as well as Second Empire.

There have also been Folk as well as Shingle Style Victorian Houses. As it is, the names of the architectural styles, apart from their adaptations had varied between the countries. Several homes merged the elements of various styles and therefore are not easily discernible as one particular style. In the United States, highly decorated houses have often been addressed to as gingerbread houses.

Some of the most prominent Victorian era cities include Richmond, London, Toronto, Boston, St. Louis, Louisville, Saint Paul, Galena, Nelson, Sydney, Melbourne, IL, Galveston, Chicago, Detroit, San Francisco, Glasgow, Kolkata, Mumbai, Pittsburgh, Manchester, Philadelphia, Grand Rapids, as well as New Orleans.

In the United States, the South End of the city of Boston has been recognized as the oldest, as well as the largest Victorian neighborhood of the country. Old Louisville in Kentucky is also believed to be one of the largest Victorian neighborhood of America.

Apart from that, Richmond, Virginia is also home to a number of large Victorian neighborhoods, with the Fan and Church Hill, being the most prominent. Church Hill enjoys the distinction of being a place where Patrick Henry had given his famous speech at the historic Saint John’s church.

The Distillery District of Toronto is home to the largest as well as the best preserved collection of industrial architecture of the Victorian-era in North America. Apart from that, Cabbage town has been the largest as well as the most continuous Victorian style residential area of North America. The other Victorian neighborhoods of Toronto include Annex, Corktown, Park dale, as well as Rosedale.

The Old West End neighborhood in Toledo, Ohio has been recognized as the one having the biggest collection of the late Victorian as well as Edwardian architectural homes of the United States. Carroll Avenue of Los Angeles contains the city’s highest concentration of homes of Victorian style.

There is something really fascinating about the Victorian era and almost everything related to this period, continues to fascinate us to this date, especially Victorian architecture.

images4

World Architecture Festival 2013 – a report

By Team IAnD Photography: Courtesy WAF’13

October 2 -4 2013 saw three busy days of ideation, discussion and critiques on global architecture and design at the World Architecture Festival held at Moshe Safdie designed Marina Bay Sands, Singapore – a venue as awe inspiring as the projects that unfolded within its festive panorama-

The World Architecture Festival opened to enormous numbers (reportedly the biggest yet) with the theme of 2013 bring -Value and values’, -to examine the relationship between perceptions of financial value and the values that architects typically hold about their work.-

Director of WAF’13, Paul Finch commenting on the sheer quality and diversity of the projects entered into the festival, and shortlisted for the final round of awards, said that the array of projects demonstrated the increasingly global nature of the event.

Among various stalwarts from various quarters of the world, Mumbai’s Ar. Sanjay Puri’s corporate project in Jaipur -72 Screens’, was also shortlisted for the awards.

A vibrant, thought-provoking three-day session of presentations of various projects by the architects, seminars and talks on diverse issues that touch and plague the building industry were discussed and debated. Noted international speakers, project critiques and appreciations apart, everyone waited with baited breath as the ultimate honour – the winner of the World Building of the Year 2013 award was announced and granted to the Aukland Art Gallery Toi o Tamaki in New Zealand by Frances-Jones Morehen Thorp and Archimedia.

The four main award winners including World Building of the Year Award were Botanical Garden Australia designed by landscape studio Taylor Cullity Lethlean and plant expert Paul Thompson for Landscape of the Year; National Maritime Museum of China designed by Cox Rayner Architects for Future Project of the Year; and Barcelona Apartment by David Kohn Architects for World Interior of the Year.

As part of INSIDE: World Festival of Interiors, an event held in conjunction with the WAF’13 with a concentration on interior projects, shortlisted 59 outstanding interior projects across the 12 award categories, Bars and Restaurants, Creative Re-use, Culture, Display, Education, Health, Hotels, Offices, Residential, Shopping Centres, Shops, and Transport. For the complete list of awardees, do check out:

to view images click on globalhop.indiaartndesign.com

home11

Architecture A Brief Introduction and Marketing Tips

Architecture is an art and science that marries the building and design of structures. In some ways one can say that, along with engineering, it is the sign of civilization. Once man was able to settle down and fashion his own dwelling, even by primitive means, this was the start of the first civilizations.

Originally, these structures were purely functional serving to keep people safe from bad weather and wild animals, and to give them privacy. But as modern construction procedures were developed, along with more advanced materials, architecture and engineering began to take a more artistic leaning.

The earliest treatise on the subject, De Architectura, was written by Vitruvius, dates back to the 1st Century CE. In it, the Roman architect says that a building has to have form, function, and durability. To this day, most architects still conform to those three tenets. It is probably even safe to say that some are more successful at adhering to those dogmas than others.

A few examples of these people are Frank Lloyd Wright, a major proponent of organic architecture who is often touted to be the greatest American architect of all time (famous for the house called Fallingwater and for the Guggenheim Museum in New York City); I.M. Pei, a master of modern architecture who created the pyramid at the Louvre and the Bank of China Tower in Hong Kong; Frank Gehry, who designed the Dancing House in Prague; and the landscape architect and artist, Isamu Noguchi, among many others.

If these names sound familiar to you, it’s probably because their works are admired the world for being beautiful while being both functional and enduring. You’re likely to see their buildings mentioned in architectural texts, art books and even featured in architecture postcard designs. These, by the way, are not only proof of how respected the geniuses mentioned above are but, also function as a way to market their work. Like a portfolio, one might say.

In fact, some people in the business might publish high quality books that double as coffee table books and company profiles. Or, perhaps, they might have architecture postcard designs and construction postcard designs printed on elegant cards to send to potential clients. Others still, might support these efforts with their own websites.

home14

Andolasoft Java J2EE Application Development using MVC Architecture is a Great Option

Java is the class based object oriented programming language which is complex in nature. This complexity requires huge experience and high level skill to develop quality applications which facilitate the java developers to build secure and scalable applications in fast pace. Andolasoft has vast experience in providing Java application development services to its customers spread over the world in different Java technologies like J2EE framework, J2ME, Java Server Pages (JSP), with advanced tools and techniques. We have skilled Java/J2EE development team who have enormous experience working on wide range of business requirement and formulate the best solution for your business. They believe java is the best option for developing secure, flexible and scalable database driven applications and java reduces the coding and the same code can be reused in different platforms. MVC architecture is the Model-View-Controller separate the business logic and application data from the presentation data to the user. It divides an application into three parts: the model, the view and the controller and applied in the graphical user interaction model like input, processing and output. The objective of MVC architecture is to separate application data and business logic from presentation data. In working condition the model class represents the data to the application. Model classes know what the data is, how to create it, how to delete it, how to store it and how to retrieve it. Controller provides the logic of the application and MVC tells how to design software. Andolasoft Java developers are continuously working with MVC architecture from last couple of years. They have successfully deployed robust and highly flexible applications which are highly secure and scalable. Here are our Java development services: Designing and development of web/desktop applications Existing applications enhancement Application Integration Database design and administration Application migration to Java/J2EE platform Quality Testing We are one of the leading custom software development company, not only expertise in java application development but also we have deployed many applications in different platforms like RoR, CakePHP, Android and etc. To know more about our services and applications please visits our project portfolio. If you are interested to hire us the please feel free to call us at 408-625-7188 or email at . .